2nd Hand

Machinery choice: Murska or Korte?

Murska for on farm self-sufficiency. Korte for the
contractor or farmers sharing machinery
.

Two Murska models are available, the 350S and 700S, capable of crimping five and ten tonnes of moist grain per hour (or dry rolling four and eight tonnes) respectively. They are ideal for the farmer who wishes to go self-sufficient by making the most of home grown feed. These Murskas complement the larger Korte range that is used by either contractors or farmers who are sharing equipment.

The Murska 350S has a crimping output of 5 tonnes per hour of moist cereals and approximately 4 tonnes per hour when used for dry rolling. Transported on a tractor's three-point linkage and normally powered by the tractors pto, power requirement is 30-40 hp. The 350S can also be powered by an electric motor. Hopper capacity is 2800 litres.

Murska 700S (shown on right)
Double the capacity of the 350S, the 700S is ideal for the bigger farm where higher tonnage and outputs are required. Power requirement for this machine is 60-70 hp from either the tractor pto or an electric motor. As with its smaller brother, the 700S has belt-driven rollers and, as well as being a first rate moist grain crimper, is also ideal for processing all dry combinable crops.

 

Specifications
Murska 350S
Murska 700S
 
Output maximum
Ave. 5 tonnes of moist grain
Ave. 10 tonnes of moist grain
per hr (or 4t when dry rolling)
per hr (or 8t when dry rolling)
Power requirement
15-30kW
20-50kW
Electronic motor adaptor sets
available
available
Height
1300mm
1300mm
Length
1200mm
1450mm
Width
1100mm
1150mm
Weight
320kg
540kg
Hopper volume
190 litres
270 litres
Extension hoppers
1700 litres
2600 litres
Roller drive
belt
belt
Standard roller surface
spot fluted
spot fluted
Size
2 x 350mm long, 300mm dia.
2 x 700mm long, 300mm dia.
Tractor connection
3 point linkage
3 point linkage
Elevator lifting height
3.3m
3.3m
Elevator extensions
1m or 2m
1m or 2m
Preservative applicator
optional extra
optional extra